purgan
04-24 08:39 AM
gccube/kamesh
congratulations on your GC. must be a great feeling. I see ypur 485 RD was in JUne 2007, was yours based on a Labor substitution?
congratulations on your GC. must be a great feeling. I see ypur 485 RD was in JUne 2007, was yours based on a Labor substitution?
wallpaper circulatory system diagram labeled. the circulatory system for
waiting4gc
07-18 03:06 PM
As long as you file I 140 as soon as your labor is approved. Spouse has nothing to do with application till it hits the 485 stage so you can file your 485 later.
Make sure you file your 140 in the regular channels and it should take some time to get approved.
Even if you decide to change jobs, after 140 is approved, the priority date is yours. So if you have a copy of the approved I 140 when you change jobs, you have to start the process all over again but by submitting the approved I 140 from previous company, you can maintain the priority date.
Hello guys,
First of all thank you very much for your answers in advance.
I am currently on H1-B (valid till 2010) and recently applied for PERM LC. I work for a non-profit organization and the category is EB-2. Nationality: Turkey.
I was planning to go for my GC but my plans have recently changed. I am planning to get married in 2009 Summer (earlier is not possible). I have done my research and found out that if I receive my GC before I get married, it will be very difficult to get my spouse here.
I am expecting to get the LC in about 4 months. Then, most probably I can file I-140 and I-485 concurrently as the visa numbers will be available for my case. However, I am not planning to do it anymore due to the reasons mentioned above.
So, here are my questions:
Now, the new rule tells that LC certification must be used within 180 days. So, can I just file I-140 while single and even though my visa numbers are current for I-485 (Can I seperate I-140 and I-485 and save I-1485 for after marriage - Summer 2009). Does it matter for the purposes of I-140, if I am single - and then add my spouse to I-485 in the US (She will be on H-4 with me here)?
I am not planning to change my job. So, would my I-140 have an expiration date?
Do you have any other suggestions? Thank you!
Make sure you file your 140 in the regular channels and it should take some time to get approved.
Even if you decide to change jobs, after 140 is approved, the priority date is yours. So if you have a copy of the approved I 140 when you change jobs, you have to start the process all over again but by submitting the approved I 140 from previous company, you can maintain the priority date.
Hello guys,
First of all thank you very much for your answers in advance.
I am currently on H1-B (valid till 2010) and recently applied for PERM LC. I work for a non-profit organization and the category is EB-2. Nationality: Turkey.
I was planning to go for my GC but my plans have recently changed. I am planning to get married in 2009 Summer (earlier is not possible). I have done my research and found out that if I receive my GC before I get married, it will be very difficult to get my spouse here.
I am expecting to get the LC in about 4 months. Then, most probably I can file I-140 and I-485 concurrently as the visa numbers will be available for my case. However, I am not planning to do it anymore due to the reasons mentioned above.
So, here are my questions:
Now, the new rule tells that LC certification must be used within 180 days. So, can I just file I-140 while single and even though my visa numbers are current for I-485 (Can I seperate I-140 and I-485 and save I-1485 for after marriage - Summer 2009). Does it matter for the purposes of I-140, if I am single - and then add my spouse to I-485 in the US (She will be on H-4 with me here)?
I am not planning to change my job. So, would my I-140 have an expiration date?
Do you have any other suggestions? Thank you!
Kapils573
12-07 11:17 AM
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=644678d8a15e0110VgnVCM1000000ecd190aRCR D
Scheduled USCIS.gov site outages
Our Case Status Online system, Change of Address Online system, processing times, and field office/Application Support Center/Civil Surgeon locator will be unavailable due to server upgrades from 9:30 PM on Friday December 7 until about 8:00 PM on Monday December 10.
In addition, our search engine and naturalization self-test will be unavailable due to scheduled server maintenance on Sunday Dec. 9, 2007, from midnight to 6 AM Eastern Time.
We apologize for the inconvenience.
Scheduled USCIS.gov site outages
Our Case Status Online system, Change of Address Online system, processing times, and field office/Application Support Center/Civil Surgeon locator will be unavailable due to server upgrades from 9:30 PM on Friday December 7 until about 8:00 PM on Monday December 10.
In addition, our search engine and naturalization self-test will be unavailable due to scheduled server maintenance on Sunday Dec. 9, 2007, from midnight to 6 AM Eastern Time.
We apologize for the inconvenience.
2011 circulatory system diagram not
TeddyKoochu
01-06 08:43 AM
All depends on spillover; it’s basically "NO SPILLOVER NO CHANGE". So just hoping for spillover to happen. I believe that the current bulletin might just come out late this week or early next week.
more...
reddymjm
03-16 01:22 PM
Guruji - Can you please predict something about my GC application too :D
Shishyaji, Your PD is 18 months after mine. Keep checking on me. You should get your GC after an year or two after mine, until unless the recapture or some magic by USCIS/DHS.
Shishyaji, Your PD is 18 months after mine. Keep checking on me. You should get your GC after an year or two after mine, until unless the recapture or some magic by USCIS/DHS.
langagadu
08-21 08:43 PM
So you are in India now. Can you give the followjg details so that IV or other folks can conatct law makers and help you.
Upload the following scanned copies.
1)Reciept number.
2)Scan copy of the ticket.
3)Address in India
4)Univeristy name (if exist).
5)Your real name.
6)Baap ka naam and maa ka naam. Attested copy scanned.
7)Passport Copy with clear photo
we are here to help you to conatct the law makers.
Do it right now, if you can't f'ur self.
Hi ,
I got deported from Chicago when I was travelling back from India because I worked at a gas station with out authorization . I had to admit that I worked and I was deported back by flight same evening . They gave me the ticket .
My visa is cancelled and I was told to go back to consulate and get a new visa .
I want to come back and complete my studies as I have only 1 semester left . Please help what what should I do now .
thanks in advance.
RD
Upload the following scanned copies.
1)Reciept number.
2)Scan copy of the ticket.
3)Address in India
4)Univeristy name (if exist).
5)Your real name.
6)Baap ka naam and maa ka naam. Attested copy scanned.
7)Passport Copy with clear photo
we are here to help you to conatct the law makers.
Do it right now, if you can't f'ur self.
Hi ,
I got deported from Chicago when I was travelling back from India because I worked at a gas station with out authorization . I had to admit that I worked and I was deported back by flight same evening . They gave me the ticket .
My visa is cancelled and I was told to go back to consulate and get a new visa .
I want to come back and complete my studies as I have only 1 semester left . Please help what what should I do now .
thanks in advance.
RD
more...
kumar1
03-18 11:49 AM
I am EB3-India with PD July-2005. On 3/10/2009 USCIS issued an RFE. It is about job verification/continuation. USCIS wants my employer to verify that future job is still available.
My paralegal said and I quote, USCIS is issuing this kind of RFE on almost every case. Present economic situation might be the main reason behind it.
My paralegal said and I quote, USCIS is issuing this kind of RFE on almost every case. Present economic situation might be the main reason behind it.
2010 circulatory system diagram not
dhirajs98
08-18 02:18 PM
sorry to break the bad news to you,but this usually means a denial. My I 140 was approved recently, the online status cleared said it's approved. I read many posts on this forum who had the same online status as yours and their I 140's were denied.
Are you sure it would a straight denial or they can ask for more evidence? And if it is a denial then what are my options? I have another I140+I485 filed with my EB3 labor. Is it possible that denial of EB2 I-140 would affect my EB3 I-140 processing. I remeber that my attorney used my EB2-!-140 receipt when filed Eb3 I-140+I-485.
Are you sure it would a straight denial or they can ask for more evidence? And if it is a denial then what are my options? I have another I140+I485 filed with my EB3 labor. Is it possible that denial of EB2 I-140 would affect my EB3 I-140 processing. I remeber that my attorney used my EB2-!-140 receipt when filed Eb3 I-140+I-485.
more...
ultimo
10-02 10:03 AM
u can apply 4 student loan . Even if ur credit is bad u will get SL
hair circulatory system diagram not
vivache
10-04 03:21 PM
Question.
When I check the website I see this Step 4:
Does this mean that I first need to pass the documents to the application centre and only then after 3 days can I go to the embassy?
Can't I just get the date and go to the embassy direct?
Thanks
Vivek
Step 4: You are then required to submit your forms with one recent photograph and documents as per the checklist to any of the application centres in Mumbai, Pune or Ahmedabad.
Please note: If you are submitting your forms to our application centre in Mumbai you must submit at least 3 working days in advance. E.g.: If your interview is scheduled for a Friday, you must submit your documents latest by the preceding Tuesday, provided all days in between are working days. If you are submitting your forms to our application centres in Ahmedabad or Pune, you must do so at least 4 working days in advance. E.g.: If your interview is scheduled for Friday, you must submit your documents latest by the preceding Monday provided all days in between are working days. It is recommended that you forward your documents to us immediately after scheduling an interview.
When I check the website I see this Step 4:
Does this mean that I first need to pass the documents to the application centre and only then after 3 days can I go to the embassy?
Can't I just get the date and go to the embassy direct?
Thanks
Vivek
Step 4: You are then required to submit your forms with one recent photograph and documents as per the checklist to any of the application centres in Mumbai, Pune or Ahmedabad.
Please note: If you are submitting your forms to our application centre in Mumbai you must submit at least 3 working days in advance. E.g.: If your interview is scheduled for a Friday, you must submit your documents latest by the preceding Tuesday, provided all days in between are working days. If you are submitting your forms to our application centres in Ahmedabad or Pune, you must do so at least 4 working days in advance. E.g.: If your interview is scheduled for Friday, you must submit your documents latest by the preceding Monday provided all days in between are working days. It is recommended that you forward your documents to us immediately after scheduling an interview.
more...
gc28262
06-27 10:48 AM
Hi,
I have been out of client project after May 15th 2009. I work for a major Consulting company and have been on Bench since then. Got laid off on June 22nd 2009 due to lack of work in these tough times. For the past 5 weeks, I have tried to find a project through various job sites and could not succeed to get even one client interview due to various reasons. One major reason being Billing Rate, which was not fine with my previous employer.
I am aware that my current stay is not legal anymore and have to wind up things here and leave US at the earliest. I would be getting my last paycheck till this week(June 26th 2009).
Not sure how much more time it will take for me to get a job. Can anyone advise how long can I stay here to find a project/job(if lucky to get one soon) and be able to transfer my H1 without any issues.
Please advise as I am in dilemma to stay in USA and try for 1 more month or go back to India at the earliest to find a job there, though the situation is bad there too.
Please refer to Murthy site link here
http://www.murthy.com/news/UDtermh1.html
Q4.Can I apply for a status other than H1B if I am being laid off?
A. In certain circumstances, an H1B employee may be able to apply for another status. There are a number of different options. Depending on a person's individual circumstances, one may qualify for one of these categories.
Viable options may include F-1 (student status), H-4 or F-2 (dependent of an H1B or F-1 spouse, respectively) and B-2 (tourist) or B-1 (business status). While such a changecould help one stay in status, it is important to ensure that the eligibility criteria are met for whichever status one opts. INS has confirmed that a laid-off H1B worker may apply for a visitor�s visa in order to look for employment. However, a person who is on a status other than an H1B may no longer be able to enjoy the benefits of H1B portability and will be subject to the H-1 cap. This may be the only available option if the applicant's I-94 is expiring, but should not be done without a full understanding of the legal and other consequences.
I have been out of client project after May 15th 2009. I work for a major Consulting company and have been on Bench since then. Got laid off on June 22nd 2009 due to lack of work in these tough times. For the past 5 weeks, I have tried to find a project through various job sites and could not succeed to get even one client interview due to various reasons. One major reason being Billing Rate, which was not fine with my previous employer.
I am aware that my current stay is not legal anymore and have to wind up things here and leave US at the earliest. I would be getting my last paycheck till this week(June 26th 2009).
Not sure how much more time it will take for me to get a job. Can anyone advise how long can I stay here to find a project/job(if lucky to get one soon) and be able to transfer my H1 without any issues.
Please advise as I am in dilemma to stay in USA and try for 1 more month or go back to India at the earliest to find a job there, though the situation is bad there too.
Please refer to Murthy site link here
http://www.murthy.com/news/UDtermh1.html
Q4.Can I apply for a status other than H1B if I am being laid off?
A. In certain circumstances, an H1B employee may be able to apply for another status. There are a number of different options. Depending on a person's individual circumstances, one may qualify for one of these categories.
Viable options may include F-1 (student status), H-4 or F-2 (dependent of an H1B or F-1 spouse, respectively) and B-2 (tourist) or B-1 (business status). While such a changecould help one stay in status, it is important to ensure that the eligibility criteria are met for whichever status one opts. INS has confirmed that a laid-off H1B worker may apply for a visitor�s visa in order to look for employment. However, a person who is on a status other than an H1B may no longer be able to enjoy the benefits of H1B portability and will be subject to the H-1 cap. This may be the only available option if the applicant's I-94 is expiring, but should not be done without a full understanding of the legal and other consequences.
hot system diagram labeled.
saloni
07-18 02:28 PM
I am currently on H1b visa and have filed I-485 as primary. My spouse is also on H1B and is derivative. We both have EAD's but are still maintaining H1B status.
My employer is reluctant to file H1B extension as there are lots of RFE's and client/vendor letter requirements and paper work he does not want to do.
He has asked me to change my status to H4 and work on EAD.
Can I work on EAD without filing H1B-H4.
or
After the new memo regarding unlawful status, it is better to file H1 to H4 and continue working on EAD for my employer.
Will this affect anyhow on my chances of approval of my AOS?
Appreciate your response.
My employer is reluctant to file H1B extension as there are lots of RFE's and client/vendor letter requirements and paper work he does not want to do.
He has asked me to change my status to H4 and work on EAD.
Can I work on EAD without filing H1B-H4.
or
After the new memo regarding unlawful status, it is better to file H1 to H4 and continue working on EAD for my employer.
Will this affect anyhow on my chances of approval of my AOS?
Appreciate your response.
more...
house makeup circulatory system
Green06
10-15 11:35 AM
DMV laws vary from State to State. When I lived in CA they gave me 5+ yrs of DL but In my home state of Minnesota DMV puts status chek date on the DL which is the date of the I94 expiration. They send a letter at home to show the proof of extension otherwise the DL will be cancelled. I am planning to get it extended by using EAD (i haven't received EAD yet and my H1b extension is being applied). I read on Murthy's site that using EAD for DMV pupose doesn't affect the H1b status.
tattoo circulatory system diagram not
anurakt
12-27 09:31 AM
Hi Everyone,
Just wanted to give an update of the tri state meeting on 12/24 happened last sunday. Eight to Nine members attended this meeting and folliwing were the discussions points :
Pappu gave us an update and insight in to IV's working and what is going on. This changed lot of members thinking about IV , i.e. members learnt on how much political capital the core and IV has gained in the past 1 year. How without much money and only with grass root operation we have acheived so much . Also Pappu gave us na update on where is everyhting currently. I cannot give those details for obvuious reasons , but the members present at the meeting know what I am talking about. We further discussed that how important it has become that instead of just concentrating in DC , we need to energize ousrselved in each and every state. This is very important as we have time only till Aug 2007 to acheive whatever we can, after which the presidential campaign would take over everyhting.
Members were informed about on how the contribution has been used currently %ge wise. Also at the meeting it was dicussed that the whole face of the IV looks very Indian ad other ethinic communities who too are retrogressed are not involved. Thus it was urged to those members especially from other ethinic communities to please come forward and get more faces in,this would make IV a complete representation of the current retrogression.
Also in the dicussions we told members that we need to be riding on our own identitiy and should not mix our goals with illegals. Anytime we talk about IV we should maintain phrases like "High Skilled Legal Immigrants" "paying taxes" etc etc. This is very importnant for meet the lawmakers program , as this will create our own identiity and political capital.
Meet the lawmakers is a very important program and members are urged to please participate in numbers as much as possible, there may be a chance that people from a particular state may have to show up in hundreds near some senators office who may be very important for our goals. Please do not ask the names , if interested please join state chapeter meeting and if you don't have one, please start one and ask a core to join you.
The JOB of IV is just not CIR, CIR would be the first win and there are more fights after CIR. IV wants to be the face of any legal immigrant issue resolution in this country and wants to make sure that the political capital and efforts we created doesn't go wasted after retrogression is finished.... We want tobe an organization which can be effective in country and help all those who are or who may be facing similar situation in coming years. The job won't finish with CIR, IV may need to work further on things like USCIS inefficiencies... FBI name check and other issues. To accomplish all this we need to be bigger stronger and grsass root level organization.
I urge members from other state to please keep contributing and attend state chapter meeting.... Friends beleive me when you meet in the chapter meeting , the kind of updates you get is 1000 times more than what you see on the online forum.
I would also request other members who attended this meeting to please write there post meeting views.
Last but not the least , I would like to thank every member who participated to make it a sucesses and other members who could not participate due to personal issues, I am sure they will make it next time (Please get up early :) :) )
Just wanted to give an update of the tri state meeting on 12/24 happened last sunday. Eight to Nine members attended this meeting and folliwing were the discussions points :
Pappu gave us an update and insight in to IV's working and what is going on. This changed lot of members thinking about IV , i.e. members learnt on how much political capital the core and IV has gained in the past 1 year. How without much money and only with grass root operation we have acheived so much . Also Pappu gave us na update on where is everyhting currently. I cannot give those details for obvuious reasons , but the members present at the meeting know what I am talking about. We further discussed that how important it has become that instead of just concentrating in DC , we need to energize ousrselved in each and every state. This is very important as we have time only till Aug 2007 to acheive whatever we can, after which the presidential campaign would take over everyhting.
Members were informed about on how the contribution has been used currently %ge wise. Also at the meeting it was dicussed that the whole face of the IV looks very Indian ad other ethinic communities who too are retrogressed are not involved. Thus it was urged to those members especially from other ethinic communities to please come forward and get more faces in,this would make IV a complete representation of the current retrogression.
Also in the dicussions we told members that we need to be riding on our own identitiy and should not mix our goals with illegals. Anytime we talk about IV we should maintain phrases like "High Skilled Legal Immigrants" "paying taxes" etc etc. This is very importnant for meet the lawmakers program , as this will create our own identiity and political capital.
Meet the lawmakers is a very important program and members are urged to please participate in numbers as much as possible, there may be a chance that people from a particular state may have to show up in hundreds near some senators office who may be very important for our goals. Please do not ask the names , if interested please join state chapeter meeting and if you don't have one, please start one and ask a core to join you.
The JOB of IV is just not CIR, CIR would be the first win and there are more fights after CIR. IV wants to be the face of any legal immigrant issue resolution in this country and wants to make sure that the political capital and efforts we created doesn't go wasted after retrogression is finished.... We want tobe an organization which can be effective in country and help all those who are or who may be facing similar situation in coming years. The job won't finish with CIR, IV may need to work further on things like USCIS inefficiencies... FBI name check and other issues. To accomplish all this we need to be bigger stronger and grsass root level organization.
I urge members from other state to please keep contributing and attend state chapter meeting.... Friends beleive me when you meet in the chapter meeting , the kind of updates you get is 1000 times more than what you see on the online forum.
I would also request other members who attended this meeting to please write there post meeting views.
Last but not the least , I would like to thank every member who participated to make it a sucesses and other members who could not participate due to personal issues, I am sure they will make it next time (Please get up early :) :) )
more...
pictures circulatory system diagram not
WeShallOvercome
07-26 02:58 PM
Can any one tell the time between check cleared and Notice issued. My lawyer sent the checks and he will never bother checking his account daily for me. Hence Notice is the only thing i will get.
Same thing here. Even the notice will go to the lawyer's office and they won't bother telling me unless asked a few times.
Other than the physical notice, I guess we can get the receipt numbers by calling them once we see a substantial number of members getting the numbers/notices.
Same thing here. Even the notice will go to the lawyer's office and they won't bother telling me unless asked a few times.
Other than the physical notice, I guess we can get the receipt numbers by calling them once we see a substantial number of members getting the numbers/notices.
dresses circulatory system diagram
thomachan72
06-21 05:51 PM
I would suggest that before you take more interest in her case, first consult with her husband and make sure it is OK with him ;) ;) You know what I mean, right?:D
more...
makeup circulatory system diagram not
pmpforgc
10-20 08:26 PM
[QUOTE=bluekayal]Quick approval, applied on 10/17 and approved on 10/20 after continous LUDs. The customer service rep at TSC told me when I called this morning. Awaiting the 5 emails.
But on the I-485 things are bit muddy. TSC told me the fingerprint is stuck at FBI, FBI told me today they returned on the same day..Aug 22, 2006! TSA rep suggested we fax the TSC Director to request updating records. My boss did that. Lets see what happens.
Its a relief to have an approved I-140
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hairstyles circulatory system diagram
sonia_sd
10-19 07:15 PM
I second it :) NO SSN REQUIRED FOR PP. I filled out 000-00-0000 for my son. I believe there was a site or document I looked up and got this info (dont remember where I found it).
You dont need a PIO. If it is emergency or you dont have time, just get a multiple entry visa. For kids at that age it does not make any difference whether they enter on PIO or a visa. Chicago issues visa the same day.
BTW does Indian consulate do background check and issue 221(g) :D:D
PS: I live in IL as well and you dont need SSN for kids to get a PP :)
SSN IS Mandatory.
You dont need a PIO. If it is emergency or you dont have time, just get a multiple entry visa. For kids at that age it does not make any difference whether they enter on PIO or a visa. Chicago issues visa the same day.
BTW does Indian consulate do background check and issue 221(g) :D:D
PS: I live in IL as well and you dont need SSN for kids to get a PP :)
SSN IS Mandatory.
isthereawayout
02-22 11:30 AM
I am trying to port from EB3-EB2 from the same employer.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
corleone
11-02 10:42 AM
See signature for details:
沒有留言:
張貼留言